juliaann疯狂作爱,99久久国产综合精品国,久久久久99精品成人片三人毛片

Overview
In this workshop, you will learn to use DFT Compiler to perform RTL and gate-level DFT checks and insert scan using top-down and bottom-up flows. The workshop will show you how to analyze the reported data to identify common DFT violations and then fix the original RTL design. The class explores essential techniques to support large, multi-million gate SOC designs including the bottom-up scan insertion flow in the logical (Design Compiler) domain. Techniques learned include: performing scan insertion in a top-down flow; meeting scan requirements for number of scan chains, maximum chain length, and reusing functional pins for scan testing; and using Adaptive Scan (DFTMAX) to insert additional DFT hardware to reduce the test time and the test data volume required for a given fault coverage. ObjectivesAt the end of this workshop the student should be able to:

Define the test protocol for a design and customize the initialization sequence, if needed
Perform DFT checks at both the RTL and gate levels
State common design constructs that cause typical DFT violations
Automatically correct certain DFT violations at the gate level using AutoFix
Insert scan to achieve well-balanced top-level scan chains and other scan design requirements
Write a script to perform all the steps in the DFT flow, including exporting all the required files for ATPG and place & route.
Implement Rapid Scan Synthesis (RSS) in a top-down scan insertion flow achieving well-balanced scan chains
Modify a bottom-up scan insertion script for full gate-level designs to use test models/ILMs with RSS and run it
Preview top-level chain balance using test models/ILMs after block-level scan insertion and revise block-level scan architecture as needed to improve top-level scan chain balance.
Modify a scan insertion script to include DFT-MAX Adaptive Scan compression

Audience Profile
Design and Test engineers who need to identify and fix DFT violations in their RTL or gate-level designs, insert scan into multi-million-gate SoCs, and export design files to ATPG and P&R tools Prerequisites
There are no prerequisites for this workshop. Prior experience with Design Compiler, Design Vision, and with writing Synopsys Tcl scripts is useful, but not required. Course 1.

Introduction to Scan Testing
DFT Compiler Flows
DFT Compiler Setup
Test Protocol
DFT Design Rule Checks

DFT DRC GUI Debug
DRC Fixing
Top-Down Scan Insertion

Exporting Files
High Capacity DFT Flows
Multi-Mode DFT
DFT MAX

Synopsys Tools Used

DFT Compiler 2010.03-SP3
Design Vision 2010.03-SP3
Design Compiler 2010.03-SP3
TetraMAX 2010.03-SP3

九九99在线视频-九九99香蕉在线视频美国毛片-九九99热久久精品在线9-九九99热-九九99久久精品在免费线bt-九九99久久